Title
Fix Your SCR Emission Faults Fast – OEM Standard NOx Sensor FPLA-5J299-CC (0281006790 / 0281006791) Direct Fit for Jaguar Land Rover Diesel
Meta Description
High-precision replacement NOx nitrogen oxide sensor OEM FPLA-5J299-CC, cross reference Bosch 0281006790 & 0281006791. Direct plug-and-play for Jaguar XE/XF/F-Pace, Land Rover Discovery/Ranger Rover Euro 6 diesel vehicles. Eliminate engine warning lights, resolve SCR system errors & pass EU emissions test. IATF 16949 certified, 12-month warranty, factory calibrated aftermarket exhaust sensor.
Opening Hook
Got an illuminated engine check light, reduced power mode, failed MOT/emissions test, or persistent SCR fault codes on your Jaguar or Land Rover diesel? The faulty NOx sensor FPLA-5J299-CC is the most common culprit. Our aftermarket OEM-matched NOx sensor with Bosch cross part numbers 0281006790 and 0281006791 delivers factory-level accuracy to restore full vehicle performance and meet strict Euro 6 emission standards.
Why Your Original NOx Sensor Fails
NOx sensors sit directly in the hot exhaust stream, enduring constant soot buildup, extreme thermal shock, vibration, and corrosive exhaust fumes. Common failure symptoms you may notice:
- Permanent DPF/SCR warning light on dashboard
- Engine enters limp home mode with limited torque & speed
- MOT/emission test failure due to NOx reading errors
- Fault codes P2201, P2202, P2463, P2002 related to NOx signal loss
- Excessive AdBlue consumption caused by incorrect exhaust gas feedback
A broken nitrogen oxide sensor breaks the closed-loop SCR urea injection system, risking costly catalytic damage and heavy EU environmental fines. Replace it with our calibrated FPLA-5J299-CC sensor to avoid expensive garage repair bills.
Product Core Info
Full OEM Part Numbers for Cross Reference
- OE LR/Jaguar Part: FPLA-5J299-CC
- Bosch Reference Numbers: 0281006790 | 0281006791
- Connector: 6-wire 5-pin OEM matching plug
- Application: Downstream SCR NOx monitoring sensor for Euro 6 2.0 SD4 diesel engines
- Standard: Compliant with EU Euro 6 OBD emission regulations
- Certification: IATF 16949 automotive grade production, vehicle-grade HTCC ceramic chip core
Key Product Advantages (WJIECO Brand Core Selling Points)
- 100% Direct OEM Replacement, Zero Modification Perfect identical housing, cable length, thread size and factory plug. Plug-and-play installation without cutting, wiring modification or extra adapters. Matches original ECU CAN communication protocol seamlessly.
- Car-Grade High Precision Ceramic Sensing Chip Adopts high-temperature co-fired ceramic (HTCC) core same as OEM factory units, ±10ppm stable measurement accuracy. Ultra-fast startup response under 80s, far better than generic low-cost sensors prone to signal drift.
- Full Sealed Heavy-Duty Waterproof & Anti-Corrosion Design Fully encapsulated controller module + heat-resistant stainless steel probe. Resists exhaust soot, sulfur poisoning, thermal cycling (-40℃ ~ 850℃ working range) and road splash water for long service life.
- Stable SCR System Control, Cut AdBlue Waste Deliver real-time accurate NOx concentration data to ECU, optimize urea injection volume, reduce unnecessary AdBlue consumption, restore full engine power and eliminate limp mode triggers.
- Rigorous Factory Calibration & Full Quality Testing Every sensor undergoes aging, vibration, high-low temperature cycling and exhaust simulation testing before shipment. Consistent signal output avoids recurring fault codes after replacement.
- Cost-Effective Aftermarket Alternative with Full Warranty 70% lower cost than dealer OEM parts, backed by 12-month global warranty. Bulk wholesale discount available for repair shops, auto garages and vehicle fleets.
Compatible Vehicle Models
This FPLA-5J299-CC NOx sensor fits all Euro 6 diesel 2.0 SD4 models below:
Jaguar
- Jaguar XE 2.0 SD4 Diesel
- Jaguar XF 2.0 SD4 Diesel
- Jaguar F-Pace 2.0 SD4 AWD Diesel SUV
Land Rover
- Land Rover Discovery 5 2.0 TD4
- Range Rover Sport 2.0 SD4
- Range Rover Velar 2.0 D Diesel
Easy Installation Steps
- Cool down exhaust system completely before disassembly to avoid burns
- Unplug the original NOx sensor wiring connector under vehicle chassis
- Unscrew the old sensor probe from SCR exhaust pipe
- Thread our new FPLA-5J299-CC sensor into the exhaust mounting port
- Lock the OEM plug into position, clear stored fault codes via OBD scanner
- Test drive 5–10km to confirm warning lights disappear and power returns
No professional mechanic required; DIY repair saves hundreds in service labor fees.
Who This Sensor Is For
- Private Jaguar/Land Rover diesel owners facing emission faults
- Independent auto repair garages & mobile mechanics bulk sourcing emission sensors
- Fleet managers with multiple Euro 6 diesel SUVs
- Auto parts resellers & cross-border aftermarket parts distributors
Trust Our Manufacturing Strength
Our WJIECO NOx sensors are produced under IATF 16949 quality system, with independent R&D lab for exhaust sensor calibration. We supply matching emission sensors for mainstream vehicle OEMs including GM, Renault and SAIC, with strict car-grade raw material screening and full production traceability. All products pass EU environmental certification for road legal use across European countries.
FAQ Section
Q1: Will this sensor clear my NOx fault code permanently?
A1: Yes. Our factory-calibrated chip provides consistent accurate readings matching OEM specs. After installation and DTC code clearing, recurring NOx signal errors will be fully resolved.
Q2: Is this sensor road legal for EU MOT inspection?
A2: Fully Euro 6 compliant with standard OBD signal output. Vehicles fitted with our sensor pass all European emission tests without issues.
Q3: How long is the warranty period?
A3: 12-month full warranty against manufacturing defects. We offer technical support and fast replacement service for bulk orders.
Q4: Do you support wholesale bulk orders?
A4: Yes. We provide tiered volume discounts for garages and parts distributors, support customized packaging and fast global shipping to EU, UK, DE, FR, PL and other European markets.
CTA Ending
Tired of recurring engine warning lights, power loss and failed emissions tests? Replace your faulty NOx sensor with our OEM-standard FPLA-5J299-CC (0281006790 / 0281006791) today.
- Single unit retail ready in stock for fast dispatch
- Bulk trade pricing for auto repair businesses
- Global shipping + dedicated after-sales technical support
Click the product page to check stock & place your order, restore your Jaguar/Land Rover’s full power and emission compliance!
