WJIECO 12598443 EGT Sensor. OEM-grade exhaust gas temperature sensor for US-market GM 6.6L Duramax diesel trucks. Protect DPF, plug & play install.
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
12598443 EGT Sensor Overview
The 12598443 EGT Sensor manufactured by WJIECO is a critical component within diesel exhaust aftertreatment systems for US-spec GM heavy-duty pickup trucks. Mounted on exhaust piping near the DPF and SCR assembly, this high precision thermistor sensor continuously samples exhaust gas temperature and transmits stable electrical signals to the vehicle ECU.
The ECU fully relies on these live temperature readings to safely execute DPF regeneration cycles, control exhaust heat peaks, and safeguard the DPF, SCR catalyst and other costly exhaust hardware against permanent thermal burnout. A degraded or failed EGT sensor commonly triggers check engine lights, disables DPF regeneration routines, causes engine power derate, and results in unexpected downtime for work trucks. This sensor cross-references OEM number: 12598443 for simple parts lookup and replacement for US customers.
https://wjieco-autoparts.com/product/12643246-egt-sensor/
H2: OEM-Grade Construction & Strict Factory Testing
Our 12598443 EGT sensor uses high-performance high-temperature thermistor element paired with heavy-duty solid stainless steel probe housing. All components are validated to withstand extreme exhaust heat, constant engine vibration, corrosive exhaust residues, rapid thermal shock and road contaminants under the harshest heavy-duty operating conditions.
Each finished sensor assembly goes through multi-stage factory quality checks, including precision signal calibration, high-temperature aging test, waterproof seal inspection and connector continuity testing before shipment. This rigorous QC workflow guarantees steady signal output, minimal long-term signal drift and extended service life inside the high-heat diesel exhaust environment.
H2: Vehicle Fitment (US Market Amazon Fitment List)
Standard US Amazon fitment format, matches GM OEM catalog:
- Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax Diesel (MY 2011–2016, US Spec)
- GMC Sierra 2500HD / 3500HD 6.6L Duramax Diesel (MY 2011–2016, US Spec)
Important note: Verify your VIN and original OEM part number before purchase, some sub-models may use different exhaust sensors.
Interchange OE Number: 12598443
https://www.amazon.com/dp/B0FRFXLX7V
H2: Core Benefits of 12598443 EGT Sensor
Replacing your defective exhaust temperature sensor with the WJIECO 12598443 EGT sensor fully restores reliable exhaust temperature monitoring. Accurate temperature readings let the ECU run safe DPF regeneration cycles, protect costly exhaust aftertreatment parts from heat damage, clear related EGT diagnostic trouble codes and restore full engine power output.
The heat-resistant stainless steel probe keeps temperature readings stable even under extreme exhaust operating conditions. It greatly lowers risks of premature sensor failure, intermittent fault codes and expensive roadside breakdowns. This aftermarket EGT sensor delivers OEM-equivalent performance at a fraction of dealership pricing, perfect for US fleet operators, DIY truck mechanics and professional diesel repair shops across the United States.
H2: Plug-and-Play Installation, No Dealer Programming Required
This 12598443 EGT sensor is built as a true direct OEM replacement for US market GM Duramax heavy-duty trucks. It perfectly matches factory electrical connector, thread size, probe length and mounting dimensions. Simply remove the old faulty sensor and screw this new sensor into the original threaded port. No wire cutting, harness modification or ECU reprogramming needed. After installation, clear diagnostic trouble codes with an OBD scanner to reset the vehicle onboard system.
Every WJIECO 12598443 EGT Sensor passes full functional testing before leaving our factory. If you need a durable, high-precision replacement EGT Sensor compatible with OE# 12598443 for your US GM Duramax diesel pickup, our WJIECO 12598443 EGT Sensor is your ideal choice to restore your exhaust aftertreatment system and get your work truck back on the road reliably.
Product Tags
12598443, EGT Sensor, Exhaust Gas Temperature Sensor, diesel exhaust temp sensor, GM Duramax EGT sensor, WJIECO exhaust sensor
| Weight | 0.1 kg |
|---|---|
| Dimensions | 15 × 7 × 7 cm |
Product Specifications
| Weight | 0.1 kg |
|---|---|
| Dimensions | 15 × 7 × 7 cm |
Categories
Automotive Sensors, EGT Sensors
Tags
12598443, 12598443 EGT Sensor, diesel exhaust temp sensor, EGT Sensor, Exhaust Gas Temperature Sensor, GM Duramax EGT sensor, WJIECO exhaust sensor
Be the first to review “WJIECO 12598443 EGT Sensor. OEM-grade exhaust gas temperature sensor for US-market GM 6.6L Duramax diesel trucks. Protect DPF, plug & play install.”
Shipping & Warranty
- Worldwide shipping available
- Processing time: 1–2 business days
- Warranty: 12 months
- Support: hellogreatchipled@yeah.net



















Reviews
There are no reviews yet.