WJIECO 5802472454 PM sensor DPF Particulate Sensor Compatible with Fits For IVECO Daily 2.3D / 3.0D Diesel Vehicles Diesel Exhaust Particulate Matter Sensor OEM Replace Part Number 5802472454 0281007724 Automobiles Sensors

5802472454 PM Sensor Overview

Purchase precautions
1. Please purchase according to the original OE and OEM numbers of the vehicle. If you are unable to confirm the specific model, please contact us promptly and we will provide guidance within 24 hours. You can also provide the following information about the vehicle in a timely manner (frame number, model year, displacement, engine code, fuel type) so that we can accurately match the appropriate oxygen sensor for you. Do not purchase directly without confirming the suitability of the model, as incorrect parts may result in inability to install and use.
2. Before installation, please ensure that the engine is cooled down to avoid high temperature burns. When installing, please tighten the interface to prevent air leakage.
3. After product installation, if there are problems such as faulty lights or abnormal signals, please contact us in a timely manner. We will reply within 24 hours and help you troubleshoot and solve the problem.
4. This product is for exclusive use by vehicles. Please do not modify i

The 5802472454 PM Sensor (cross reference Bosch 0281007724) is an OEM-grade diesel particulate matter exhaust sensor engineered by WJIECO for Iveco Daily diesel vans. Also known as a soot sensor or DPF particulate detector, this vital exhaust aftertreatment component measures real-time soot concentration downstream of the diesel particulate filter. It transmits precise signal readings to the vehicle ECM to manage and trigger active DPF regeneration cycles automatically.

If your Iveco Daily diesel van triggers a persistent check engine light, reduced engine power, DPF dashboard warnings, failed regeneration cycles or DPF-related diagnostic trouble codes, your factory particulate sensor is likely suffering from signal drift, burnt heating element or physical damage. Replacing the defective original sensor with this direct-fit 5802472454 replacement part is a cost-effective solution to fully restore your diesel particulate filter system.

OEM-Grade Construction and Strict Factory Testing

Our replacement 5802472454 PM sensor features a high-temperature resistant ceramic detection probe and reinforced anti-vibration internal circuit board. It is engineered to withstand extreme exhaust heat and heavy vibration during long-distance delivery, highway and work-site operation. The outer housing, wiring harness and electrical plug connector are fully dimension-matched to OEM factory specifications, preventing wire cracking, water ingress and intermittent signal failures.

Every finished sensor unit goes through high-temperature aging testing, signal calibration and waterproof sealing inspection before shipment. This quality check eliminates common flaws found in cheap generic sensors, such as unstable soot readings, delayed signal response and early premature failure.

Exact Vehicle Compatibility

This exhaust particulate matter sensor is made to perfectly fit Iveco Daily Diesel vans. Cross reference Bosch part number: 0281007724. As a core control component of the DPF system, the soot sensor allows the ECM to calculate exhaust particulate load and activate regeneration at the proper time. A faulty detector will cause constant warning lights, severe DPF clogging and failure to complete official emissions testing.

Core Benefits of Upgrading to the 5802472454 PM Sensor

Replacing your malfunctioning factory soot detector with our pre-calibrated WJIECO 5802472454 PM sensor delivers noticeable performance improvements and cuts long-term maintenance expenses. Unlike low-cost aftermarket sensors that repeatedly trigger fault codes due to poor calibration, our unit provides steady, accurate particulate data for the vehicle ECM.

Reliable sensor measurements enable the engine computer to run DPF regeneration at optimal intervals, reduce soot accumulation inside the diesel particulate filter, and prevent expensive full DPF replacement caused by irreversible blockage. After installation, you will recover throttle responsiveness, stabilize fuel consumption and clear DPF-related trouble codes.

Plug-and-Play Installation, No Dealer Programming Required

A key advantage of this 5802472454 PM sensor is its true plug-and-play design built for Iveco Daily vans. This replacement part requires no ECU reprogramming, manual calibration, wire cutting or complicated mechanical modifications.

Installation works well for both professional repair garages and DIY vehicle owners. Simply remove the damaged old sensor from the exhaust pipe, align mounting holes and secure the new sensor, reconnect the factory wiring plug, then clear stored fault codes using an OBD diagnostic scanner. After a short normal driving cycle, the Iveco DPF emission system will return to stable operation without recurring warning alerts.

Every WJIECO sensor passes complete functional testing before leaving our factory. If you need a durable, high-precision and affordable OEM replacement soot sensor for your Iveco Daily diesel delivery van, our 5802472454 PM sensor (cross 0281007724) is the ideal choice to restore your exhaust emission system.

https://detail.1688.com/offer/956037531106.html?_t=1791971688247&spm=a2615.7691456/2506.co_1_0_wangpu_score_0_0_0_0_0_0_0000_0.0

https://www.amazon.com/dp/B0F4XKV1VT

https://wjieco-autoparts.com/product/iveco-5802562478-0281008372-particulate-sensor-wjieco-brands-compatible-with-fits-for-iveco-diesel-vehicles-diesel-exhaust-particulate-matter-sensor-oem-replace-part-number-5802562478-0281008372-p/

Product Parameters
1.Product Model and OEM/OE Number:  5802472454    0281007724
2.Measurement Range: 0～25 mg/m³
3.Measurement Accuracy: ±1.0 mg/m³
4.Response Time: ＜15 s
5.Probe Operating Temperature: -20℃～450℃
6.Regeneration Temperature: 800℃
7.Supply Voltage: 12V
8.Communication Protocol: CAN/J1939
9.Mounting Thread : M22×1.5
10.Part Brand : WJIECO
11.Part Origin: Made in China
12.Packaging size: 18 * 12 * 6 cm
13.Logistics transportation weight (kg): 0.25-0.45 (1pcs)
14.Part Name: Diesel Exhaust Particulate Matter Sensor PM Sensor

WJIECO Core advantages of the product
1.Accurate measurement, meeting strict emission regulations: The measurement range is wide (0.01-0.1 mg/m ³), 5-10 times higher than traditional pressure difference methods, and can capture trace leaks. The concentration error is ≤± 1%, and the temperature compensation deviation is ± 0.2 ℃, which meets the requirements of Euro 5 and Euro 6 emission regulations and is perfectly adapted to the DPF device of vehicles.
2.Smarter Technology: Designed for fit-and-forget convenience with future-proof, re-flashable software that adapts to evolving needs.Faster Response，Third-party tests validate OE-level accuracy and responsiveness, ensuring swift and precise sensor performance.Enhanced Durability， Built to withstand harsh conditions with improved protection against dust, debris, and water ingress, ensuring long-lasting reliability.
3.Premium Material and Performance:The diesel exhaust particulate sensor housing is made of heat-resistant materials with excellent corrosion-resistant and waterproof,ensuring fast response times and long-term stability.The control box utilizes PBTGF30 engineering plastic (30% glass fiber-reinforced PBT),offering exceptional tensile strength (118.9MPa),low creep,and dimensional stability which can still provide accurate and reliable measurement results even in complex or harsh conditions. Our sensor chip is engineered with a brand-new high-temperature ceramic core, delivering precise detection. Designed for exceptional durability.
4.Effortless Installation:Package including the sensor and connector.The automotive pm sensor is installed downstream of the diesel particulate trap and can be installed easily and quickly with a single fixing nut.Exhaust Particulate Sensor seamlessly replaces older or faulty sensors while the state of particulate matter being a standard OEM replacement.
5. Stable compatibility and fault prevention: Equipped with high-quality ceramic chips and waterproof seals, it is waterproof and dustproof, avoiding sensor failure caused by moisture and dust; Stable signal transmission, eliminating problems such as engine shaking, unstable idle, and constant malfunction lights caused by oxygen sensor failures.