WJIECO AC3Z5J213C EGT Sensor. Direct replacement for AC3Z5J213A, AC3Z5J213B. Fits Ford Super Duty 6.7L Powerstroke and Transit 3.2L diesel models. Monitors exhaust temp to protect DPF system. Plug and play installation.

AC3Z5J213C EGT Sensor Overview

The AC3Z5J213C EGT Sensor manufactured by WJIECO is a critical component within diesel exhaust aftertreatment systems for US-spec Ford 6.7L Powerstroke heavy-duty pickup trucks. Mounted on exhaust piping within the DPF/SCR assembly, this high precision thermistor sensor continuously samples exhaust gas temperature and transmits stable electrical signals to the vehicle ECU.

The ECU fully relies on these live temperature readings to safely execute DPF regeneration cycles, control exhaust heat peaks, and safeguard the DPF, SCR catalyst and other costly exhaust hardware against permanent thermal burnout. A degraded or failed EGT sensor commonly triggers check engine lights, disables DPF regeneration routines, causes engine power derate, and results in unexpected downtime for heavy-duty work trucks. This sensor cross-references OEM interchange numbers: AC3Z5J213C, AC3Z5J213B, AC3Z5J213A for simple parts lookup and replacement for US customers.

https://www.amazon.com/dp/B0FRF6NVDL

http://AC3Z5J213C Exhaust Gas Temperature Sensor

H2: OEM-Grade Construction & Strict Factory Testing

Our AC3Z5J213C EGT sensor uses high-performance high-temperature thermistor element paired with heavy-duty solid stainless steel probe housing. All components are validated to withstand extreme exhaust heat, constant engine vibration, corrosive exhaust residues, rapid thermal shock and road contaminants under the harshest heavy-duty operating conditions.

Each finished sensor assembly goes through multi-stage factory quality checks, including precision signal calibration, high-temperature aging test, waterproof seal inspection and connector continuity testing before shipment. This rigorous QC workflow guarantees steady signal output, minimal long-term signal drift and extended service life inside the high-heat diesel exhaust environment.

H2: Vehicle Fitment (US Market Amazon Fitment List)

Standard US Amazon fitment format, matches Ford US OEM catalog:

• Ford F-250 Super Duty 6.7L Powerstroke Diesel (MY 2011–2016, US Spec)
• Ford F-350 Super Duty 6.7L Powerstroke Diesel (MY 2011–2016, US Spec)
• Ford F-450 Super Duty 6.7L Powerstroke Diesel (MY 2011–2016, US Spec)
• Ford F-550 Super Duty 6.7L Powerstroke Diesel (MY 2011–2016, US Spec)

Important note: Verify your VIN and original OEM part number before purchase, some sub-models may use different exhaust sensors.

Interchange OE Numbers: AC3Z5J213C, AC3Z5J213B, AC3Z5J213A

H2: Core Benefits of AC3Z5J213C EGT Sensor

Replacing your defective exhaust temperature sensor with the WJIECO AC3Z5J213C EGT sensor fully restores reliable exhaust temperature monitoring. Accurate temperature readings let the ECU run safe DPF regeneration cycles, protect costly exhaust aftertreatment parts from heat damage, clear related EGT diagnostic trouble codes and restore full engine power output.

The heat-resistant stainless steel probe keeps temperature readings stable even under extreme exhaust operating conditions. It greatly lowers risks of premature sensor failure, intermittent fault codes and expensive roadside breakdowns. This aftermarket EGT sensor delivers OEM-equivalent performance at a fraction of dealership pricing, perfect for US fleet operators, DIY truck mechanics and professional diesel repair shops across the United States.

H2: Plug-and-Play Installation, No Dealer Programming Required

This AC3Z5J213C EGT sensor is built as a true direct OEM replacement for US market Ford Powerstroke vehicles. It perfectly matches factory electrical connector, thread size, probe length and mounting dimensions. Simply remove the old faulty sensor and screw this new sensor into the original threaded port. No wire cutting, harness modification or ECU reprogramming needed. After installation, clear diagnostic trouble codes with an OBD scanner to reset the vehicle onboard system.

Every WJIECO AC3Z5J213C EGT Sensor passes full functional testing before leaving our factory. If you need a durable, high-precision replacement EGT Sensor compatible with OE# AC3Z5J213C, AC3Z5J213B, AC3Z5J213A for your US Ford Powerstroke diesel truck, our WJIECO AC3Z5J213C EGT Sensor is your ideal choice to restore your exhaust aftertreatment system and get your heavy-duty truck back on the road reliably.

Product Tags

AC3Z5J213C, AC3Z5J213B, AC3Z5J213A, EGT Sensor, Exhaust Gas Temperature Sensor, diesel exhaust temp sensor, Ford 6.7 Powerstroke EGT sensor, WJIECO exhaust sensor

https://wjieco-autoparts.com/product/ck4z12b591b-ac3z5j213c-exhaust-gas-temperature-sensor-egt-compatible-with-2011-2016-ford-f250-f350-f450-f550-super-duty-6-7l-v8-2015-2019-ford-transit-150-250-350-3-2l-l5-ac3z12b591a/