WJIECO 68054683AB EGT Sensor is an OE-grade replacement sensor engineered for modern diesel exhaust aftertreatment assemblies. It accurately monitors exhaust gas temperature and feeds precise data to ECU to manage DPF regeneration, preventing overheating damage to exhaust components. Direct fit compatible with OE# 68054683AB, 68014084AA, A0009056804. Plug-and-play installation, no ECU reprogramming required. Backed by 12-month WJIECO manufacturer warranty.

68054683AB EGT Sensor Overview

The 68054683AB EGT Sensor manufactured by WJIECO is a vital component within diesel exhaust aftertreatment systems for US spec Ram and Mercedes-Benz Sprinter vans. Mounted on the exhaust pipe near the DPF unit, this high precision thermistor sensor continuously samples exhaust gas temperature and transmits stable electrical signals to the vehicle ECU.

The ECU depends entirely on these live temperature readings to safely execute DPF regeneration cycles, control exhaust heat peaks, and safeguard the DPF, SCR catalyst and other expensive exhaust hardware against permanent thermal burnout. A failed or drifting EGT sensor commonly triggers check engine lights, deactivates DPF regeneration, causes engine power derate, and leads to unexpected downtime for these diesel work vehicles. This sensor cross-references multiple OEM part numbers: 68054683AB, 68014084AA and A0009056804 for easy parts lookup and replacement for US customers.

H2: OEM-Grade Construction & Strict Factory Testing

Our 68054683AB EGT sensor adopts high-performance high-temperature thermistor element paired with heavy-duty stainless steel probe housing. Every component is validated to withstand extreme exhaust heat, constant engine vibration, corrosive exhaust residues, rapid thermal shock and road contaminants under tough working conditions.

Each finished sensor goes through multi-stage factory quality checks, including precision signal calibration, high-temperature aging test, waterproof seal inspection and connector continuity testing before delivery. This rigorous QC procedure ensures steady signal output, low long-term signal drift and extended service life in the harsh high-heat diesel exhaust environment.

H2: Vehicle Fitment (US Market Amazon Fitment List)

For US Amazon fitment table, this is the standard American format, compatible with Mopar / Mercedes OEM catalog for USA market:

• Mercedes-Benz Sprinter 2500 / 3500 2.1L Diesel (OM651, MY 2014–2018, US Spec)
• Freightliner Sprinter 2500 / 3500 2.1L Diesel (MY 2014–2018, US Spec)
• Ram ProMaster 1500 / 2500 / 3500 3.0L EcoDiesel (MY 2014–2018, US market)

Important note: Verify your VIN and original OEM part number before purchase, some sub-models may use different sensors.

Interchange OE Numbers: 68054683AB, 68014084AA, A0009056804

https://www.amazon.com/dp/B0FRFWGQ7Y

H2: Core Benefits of 68054683AB EGT Sensor

Replacing your defective exhaust temperature sensor with the WJIECO 68054683AB EGT sensor fully restores reliable exhaust temperature monitoring. Accurate temperature readings allow ECU to perform safe DPF regeneration, shield costly exhaust aftertreatment parts from heat damage, clear related EGT fault codes and restore full engine power.

The heat-resistant stainless steel probe keeps temperature readings stable even under extreme exhaust operating conditions. It lowers risks of early sensor failure, intermittent trouble codes and costly roadside stops. This aftermarket EGT sensor delivers OEM-equivalent performance at much lower cost than dealer parts, ideal for US fleet operators, DIY mechanics and professional diesel repair shops across America.

https://wjieco-autoparts.com/product/ac3z5j213c-egt-sensor/

WJIECO AC3Z5J213C Exhaust Gas Temperature Sensor (EGT Sensor). Direct replacement for AC3Z5J213A, AC3Z5J213B. Fits Ford Super Duty 6.7L Powerstroke and Transit 3.2L diesel models. Monitors exhaust temp to protect DPF system. Plug and play installation. – WJIECO

H2: Plug-and-Play Installation, No Dealer Programming Required

This 68054683AB EGT sensor is designed as a true direct OEM replacement for US market vehicles. It perfectly matches factory electrical connector, thread size, probe length and mounting dimensions. Simply remove the old faulty sensor and screw this new sensor into the original threaded port. No wire cutting, harness modification or ECU reprogramming needed. After installation, clear diagnostic trouble codes with an OBD scanner to reset the vehicle onboard system.

Every WJIECO 68054683AB EGT Sensor passes full functional testing before leaving our factory. If you need a durable, high-precision replacement EGT Sensor compatible with OE# 68054683AB, 68014084AA and A0009056804 for your US Ram or Sprinter diesel vehicle, our WJIECO 68054683AB EGT Sensor is your best choice to restore your exhaust aftertreatment system and get your vehicle back on the road reliably.