24-hour service
Professional engineering team
Free Shipping
Product on sale
Brand: Mazda, WJIECO

WJIECO S805-18641 PM Sensor Diesel Exhaust Particulate Matter Sensor Fits For Mazda Passenger cars Diesel Car 0281007665 0281007666 S80518641

0 out of 5 based on 1 customer rating
(1 review)

Original price was: $ 299.Current price is: $ 199.

11 products sold in last 15 hours
Selling fast! Over 3 people have in their cart

WJIECO S805-18641 PM sensor is a direct OEM replacement diesel particulate matter sensor for Mazda vehicles with 2.2L Skyactiv-D diesel engine. Cross-replaces OE numbers 0281007665 and 0281007666. Plug-and-play installation requires no ECU programming or dealer coding. Effectively resolves DPF soot related fault codes, restores normal DPF regeneration, improves fuel economy and helps your vehicle pass emissions inspection. Built with high-temperature resistant housing for highway and daily driving. Backed by a 12-month WJIECO warranty.

99 in stock (can be backordered)
29 people are viewing this right now
  • Check Mark Estimated Delivery : Up to 4 business days
  • Check Mark Free Shipping & Returns : On all orders over $200
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
  • Apple Pay
Guaranteed Safe And Secure Checkout

S805-18641 PM Sensor Overview

The S805-18641 PM sensor is an OEM-grade diesel particulate matter exhaust sensor engineered by WJIECO for Mazda vehicles fitted with the 2.2L Skyactiv-D diesel engine. Also known as a soot sensor or DPF particulate detector, this vital exhaust aftertreatment component measures real-time soot concentration within the exhaust pipe. It transmits precise signal readings to the vehicle ECU to manage and trigger active DPF regeneration cycles automatically.

If your Mazda 2.2L Skyactiv-D diesel triggers a persistent check engine light, reduced engine power, DPF dashboard warnings, failed regeneration cycles or DPF-related diagnostic trouble codes, your factory particulate sensor is likely suffering from signal drift, burnt heating element or physical damage. Replacing the defective original sensor with this direct-fit S805-18641 replacement part is a cost-effective solution to fully restore your diesel particulate filter system.

OEM-Grade Construction and Strict Factory Testing

Our replacement S805-18641 PM sensor features a high-temperature resistant ceramic detection probe and reinforced anti-vibration internal circuit board. It is engineered to withstand extreme exhaust heat and continuous vibration from daily highway driving. The outer housing, wiring harness and electrical plug connector are fully dimension-matched to OEM factory specifications, preventing wire cracking, water ingress and intermittent signal failures.

Every finished sensor unit goes through high-temperature aging testing, signal calibration and waterproof sealing inspection before shipment. This quality check eliminates common flaws found in cheap generic sensors, such as unstable soot readings, delayed signal response and early premature failure.

Exact Vehicle Compatibility

This exhaust particulate matter sensor is made to perfectly fit Mazda passenger cars equipped with Skyactiv-D 2.2L diesel engines. It directly cross-replaces OEM part numbers 0281007665 and 0281007666. As a core control component of the DPF system, the soot sensor allows the ECU to calculate exhaust particulate load and activate regeneration at the proper time. A faulty detector will cause constant warning lights, severe DPF clogging and failure to complete official emissions testing.

Core Benefits of Upgrading to the S805-18641 PM Sensor

Replacing your malfunctioning factory soot detector with our pre-calibrated WJIECO S805-18641 PM sensor delivers noticeable performance improvements and cuts long-term maintenance expenses. Unlike low-cost aftermarket sensors that repeatedly trigger fault codes due to poor calibration, our unit provides steady, accurate particulate data for the vehicle ECU.

Reliable sensor measurements enable the powertrain computer to run DPF regeneration at optimal intervals, reduce soot accumulation inside the diesel particulate filter, and prevent expensive full DPF replacement caused by irreversible blockage. After installation, you will recover throttle responsiveness, stabilize fuel consumption and clear DPF-related trouble codes.

Plug-and-Play Installation, No Dealer Programming Required

A key advantage of this S805-18641 PM sensor is its true plug-and-play design built for Mazda 2.2L Skyactiv-D diesel models. This replacement part requires no ECU reprogramming, manual calibration, wire cutting or complicated mechanical modifications.

Installation works well for both professional repair garages and DIY vehicle owners. Simply remove the damaged old sensor from the exhaust pipe, align mounting holes and secure the new sensor, reconnect the factory wiring plug, then clear stored fault codes using an OBD diagnostic scanner. After a short normal driving cycle, the Mazda DPF emission system will return to stable operation without recurring warning alerts.

Every WJIECO sensor passes complete functional testing before leaving our factory. If you need a durable, high-precision and affordable OEM replacement soot sensor for your Mazda 2.2 Skyactiv-D diesel vehicle, our S805-18641 PM sensor is the ideal choice to restore your exhaust emission system.

https://www.amazon.com/dp/B0F4XKV1VT

https://wjieco-autoparts.com/product/hc3z-5l239-d-pm-sensor

Weight 0.3 kg
Dimensions 18 × 12 × 6 cm

Product Specifications

Weight 0.3 kg
Dimensions 18 × 12 × 6 cm

Categories

, , ,

Tags

, , , , , , , , ,

1 review for WJIECO S805-18641 PM Sensor Diesel Exhaust Particulate Matter Sensor Fits For Mazda Passenger cars Diesel Car 0281007665 0281007666 S80518641

0 out of 5 stars

5
0
4
0
3
0
2
0
1
0
  1. Reviewer profile image

    WJIECO Diesel sensor –

    WJIECO S805-18641 PM sensor is a direct OEM replacement diesel particulate matter sensor for Mazda vehicles with 2.2L Skyactiv-D diesel engine. Cross-replaces OE numbers 0281007665 and 0281007666. Plug-and-play installation requires no ECU programming or dealer coding. Effectively resolves DPF soot related fault codes, restores normal DPF regeneration, improves fuel economy and helps your vehicle pass emissions inspection. Built with high-temperature resistant housing for highway and daily driving. Backed by a 12-month WJIECO warranty.

Add a review

Your email address will not be published. Required fields are marked *

Shipping & Warranty

  • Worldwide shipping available
  • Processing time: 1–2 business days
  • Warranty: 12 months
  • Support: hellogreatchipled@yeah.net